Hosem Power utilize world-famous suppliers for the alternators and engines in our generators, including: CUMMINS, Perkins, Deutz, SDEC, Weichai, Isuzu, Quanchia, ensuring high-quality products. Below is our diesel generator production progress.

Manufacturing and Assembly Progress

Drawing

The engineer draws the drawing according to the actual size and prepare to bending and cutting

Bending and Cutting

Through the intelligent and automatic bending and cutting machine, complete the component of the generator set

Welding:

Welding the cut parts and preparing them for painting

Spray painting

Clean the welded body and process with triple powder coating, IR oven-cured

Mounting for noise reduction device

Process: Cutting the soundproof cotton-platinum parts assembly-paste the soundproof cotton-mount the water tank plate-generator set housing assembly

Connecting the diesel engine air end and base frame

Process: Clean the base frame-mount the anti-vibration pad-mount the water tank cross beam and alternator cross beam-install the fuel tank indicator, fuel tank cap and fuel-conduit on the base frame-connect the air end and base-mount the air filter, water tank and fan housing

Electrical assembly of control cabinet and switch box

Assembly: Knowing the specific technical conditions and standards-inspect the reliability of the equipment-getting the spare parts and accessories-placing and classification of spare parts and tools

Load testing after generator set completed

Sticking on labels and nameplates

Process: Clean the machine-stick on the label, nameplate-put accessories, specification and purchased accessories inside.

Pre-package inspection

Process: Attached documents-tools and standby accessories-logo inspection

Package

Process: Cover the acoustic cabinet with paper-made enclosure-cover the acoustic cabinet with wrapping film-perforation of acoustic cabinet