If you suspect that the battery in your generator is dead, here are some steps you can take to test it:   Check the voltage: Use a multimeter to check the voltage of the battery. A fully charged battery should read around 12.6 volts. If the voltage is lower than 12 volts, the battery may be discharged.   Load test: A load test can determine if the battery can deliver the required amount of current to start the generator. To perform a load test, connect a load tester to the battery and measure the voltage while applying a load. If the voltage drops significantly while the load is applied, the battery may not be able to deliver the required current to start the generator.   Visual inspection: Inspect the battery for any signs of damage, corrosion or leakage. If the battery terminals are corroded, clean them with a wire brush and a solution of baking soda and water.   Check the electrolyte levels: If your battery is not a maintenance-free type, check the electro...

Check the fuel level: Make sure that the generator has enough fuel to operate. If the fuel level is low, add more fuel and try starting the generator again.   Check the fuel lines: Inspect the fuel lines for any signs of damage, cracks or leaks. If the fuel lines are clogged or damaged, they will need to be repaired or replaced.   Check the fuel filter: A dirty or clogged fuel filter can prevent fuel from flowing to the engine, causing the generator to not start. Remove the fuel filter and inspect it for any signs of dirt, debris, or blockage. If the fuel filter is dirty, it will need to be cleaned or replaced.   Drain the old fuel: If the fuel in the generator is old or has been sitting for a long time, it can cause the generator to not start. Drain the old fuel from the tank and replace it with fresh fuel.   Check the carburetor: The carburetor is responsible for mixing fuel and air to provide the engine with the proper fuel-to-air ratio. If the carburetor is clog...

  There can be various reasons why a generator set may not start. Here are some of the most common reasons:   Dead battery: A dead battery is a common reason why a generator set may not start. If the battery is not charged or has reached the end of its lifespan, the generator will not be able to start.   Fuel issues: Fuel problems such as clogged fuel lines, dirty fuel filters, or old fuel can prevent a generator from starting. The fuel system should be checked regularly to ensure that the fuel is clean and flowing properly.   Electrical issues: Electrical issues such as a faulty starter, loose or corroded connections, or a faulty voltage regulator can also prevent a generator from starting.   Low oil pressure: If the oil pressure is too low, the generator may not start to prevent damage to the engine. Checking the oil pressure and adding oil as needed can help resolve this issue.   Faulty spark plug: A faulty or worn out spark plug can prevent the generat...

  Industrial generators are powerful machines that are designed to provide reliable and consistent power for a wide range of applications. To ensure that your generator runs smoothly and efficiently, it is important to perform regular maintenance. But how often should you have your industrial generator maintained? In this article, we'll explore the recommended maintenance schedule for industrial generators.   Check the oil level: Checking the oil level should be done on a daily basis. Running an engine with low oil can cause severe damage to the engine, so make sure to check the oil level daily and add oil as needed. It is important to use the correct type of oil that is recommended by the manufacturer.   Change the oil: Changing the oil in your industrial generator is typically recommended every 100-200 hours of operation or every 6 months, whichever comes first. The frequency of oil changes can vary depending on the type of generator, its usage and environmental factor...

Fuzhou Hosem Power Co., Ltd   Fuzhou Hosem Power is located in Fujian, With a modern factory building of 10,000 square meters, each product has passed strict testing engaged in production of the industrial generator,  marine diesel generator sets, portable generators, and GPU  

To calculate the generator capacity, you need to know the total power needs of the equipment you will be connecting to the generator. Start by adding up the wattage of all the equipment that you plan to run from the generator. This total wattage is the required generator capacity.   For example, if you plan to power a refrigerator that has a wattage rating of 800 watts and a television that has a wattage rating of 200 watts, then you will need a generator with a capacity of 1,000 watts.   It is important to remember to add up the wattage of all the equipment that will be connected to the generator. You should also take into account any additional wattage needs such as the starting wattage of the equipment.   It is also important to make sure that the generator is capable of providing enough power to meet the needs of all the equipment that will be connected to it. If the generator is not powerful enough, then it will overload and cause damage to the equipment.   &nb...

What is the difference between a marine generator and a generator?   The primary difference between a marine generator and a generator is their intended use. A marine generator is specifically designed to generate power for marine applications such as boats, ships, and other vessels. It is typically designed to withstand the harsh environment of being out on the open water, and is frequently more resistant to corrosion. A regular generator is designed to provide power for stationary applications, such as homes and businesses.   What benefits can I get from using a marine generator? Using a professional marine generator gives you access to a reliable source of power while on the open water. Marine generators are designed to provide consistent power even in rough seas or in areas with limited access to shore power. They are also designed to be corrosion-resistant and to withstand the harsh marine environment. Additionally, generators provide greater fuel efficiency, allowing yo...

Regular inspection of the generator set is an indispensable item to ensure the long-term stable operation of the generator, Before using the engine, what items should we check the generator?    1. Check for any damage or wear to the generator, including any visible damage to the housing, wiring, or connections.   2. Check all fuel lines, fuel filters, and fuel tanks for any clogs, leaks, or damage.   3. Check the oil level and condition.   4. Inspect the spark plugs and wiring for any damage or wear.   5. Clean all parts of the generator, including the housing, fuel lines, and engine components.   6. Check the battery for any corrosion or damage.   7. Test the generator to ensure that it is working properly.   8. Inspect the alternator and other components of the generator system.   9. Adjust the generator settings as necessary.    

  How to Make Good Generator Maintenance?    Generator maintenance is essential to ensure that your generator is working safely and efficiently. Generator maintenance involves regular preventive maintenance, inspections, repairs, and adjustments to keep your generator running in top condition.   First, it is important to perform regular inspections and preventive maintenance on your generator. generator maintenance checklist which involves checking the oil, fuel, battery, and other components of the generator system. It is also important to check the connections and wiring to ensure that everything is in working order.   Second, it is important to make sure that your generator is properly installed and serviced. This includes making sure that the generator is properly grounded and meets local safety codes. It is also important to perform regular cleaning and maintenance on the generator to prevent any build-up of dirt or debris from causing problems.   Thi...

Diesel Generator for Australian Market, with 304 Stainless Steel Canopy and Double-wall Fuel Tank   Generator Set Specification Model A-P165 Max. Power kVA 165 kW 132 Rate Power kVA 150 kW 120 Frequency Hz 50 Rate Voltage V 400/230 Rate Current A 216.5 Fuel Tank Capacity L 250 Dimension For Open-type Genset mm 2450 X 800 X 1400 Weight For Open-type Genset kg 1590 Dimension For Soundproof Genset mm 3200 X 1080 X 1500 Weight For Soundproof Generator kg 2090 Noise Level for Soundproof Generator at 7M dBA 72 Battery One of 120A Free Maintenance Battery   Engine Specification Engine Manufacturer Perkins Engines Company Limited Engine Brand Perkins Engine Model 1106A-70TAG2 No. of Cylinder 6 Cylinder in line Aspiration Turbocharged and Air to Air Aftercooled Governor Electric Engine Max. Output Power kW 153.6 Displacement L 7.0 Compression Ratio 16.0 : 1 Starting Voltage V 12 Bore mm 105 Stroke mm 135 Lubrication Oil Capacity L 16.5 Intake Air Flow L/S N.A. Fuel Consumption at 100%...