A Perkins generator is a reliable source of power, but like any other machine, it requires regular maintenance to ensure its longevity and reliability. A well-maintained Perkins generator can provide many years of uninterrupted service. Here is a recommended maintenance schedule for Perkins generators:   Daily Maintenance: Check oil and coolant levels, fuel level, and battery electrolyte level. Inspect the exhaust system and ensure there are no leaks.   Weekly Maintenance: Check air filter and clean or replace if necessary. Inspect the fan belt for wear and proper tension. Check for any fuel, oil, or coolant leaks.   Monthly Maintenance: Change the oil and oil filter. Check the coolant level and add coolant as necessary. Inspect the fuel system for leaks and clean the fuel filter.   Every 500 Hours Maintenance: Replace the air filter element. Check and adjust the valve clearance. Inspect the fuel system for leaks and replace the fuel filter. Replace the coola...

  1. Inspect the connections: Check all the electrical connections to and from the generator for signs of looseness or corrosion. Tighten any loose connections and clean any corrosion using a wire brush and a solution of baking soda and water.   2. Check the starter: Check the starter solenoid and the starter motor for any signs of damage or wear. Test the starter by using a multimeter to check for continuity and proper resistance. Replace the starter if it is faulty.   3. Check the generator control panel: Check the generator control panel for any warning lights or error codes. These can provide clues as to what is causing the electrical problem.   4. Check the fuses and circuit breakers: Check the fuses and circuit breakers for any signs of damage or wear. Replace any faulty fuses or reset any tripped circuit breakers.

  If you suspect that the battery in your generator is dead, here are some steps you can take to test it:   Check the voltage: Use a multimeter to check the voltage of the battery. A fully charged battery should read around 12.6 volts. If the voltage is lower than 12 volts, the battery may be discharged.   Load test: A load test can determine if the battery can deliver the required amount of current to start the generator. To perform a load test, connect a load tester to the battery and measure the voltage while applying a load. If the voltage drops significantly while the load is applied, the battery may not be able to deliver the required current to start the generator.   Visual inspection: Inspect the battery for any signs of damage, corrosion or leakage. If the battery terminals are corroded, clean them with a wire brush and a solution of baking soda and water.   Check the electrolyte levels: If your battery is not a maintenance-free type, check the electro...

Check the fuel level: Make sure that the generator has enough fuel to operate. If the fuel level is low, add more fuel and try starting the generator again.   Check the fuel lines: Inspect the fuel lines for any signs of damage, cracks or leaks. If the fuel lines are clogged or damaged, they will need to be repaired or replaced.   Check the fuel filter: A dirty or clogged fuel filter can prevent fuel from flowing to the engine, causing the generator to not start. Remove the fuel filter and inspect it for any signs of dirt, debris, or blockage. If the fuel filter is dirty, it will need to be cleaned or replaced.   Drain the old fuel: If the fuel in the generator is old or has been sitting for a long time, it can cause the generator to not start. Drain the old fuel from the tank and replace it with fresh fuel.   Check the carburetor: The carburetor is responsible for mixing fuel and air to provide the engine with the proper fuel-to-air ratio. If the carburetor is clog...

  There can be various reasons why a generator set may not start. Here are some of the most common reasons:   Dead battery: A dead battery is a common reason why a generator set may not start. If the battery is not charged or has reached the end of its lifespan, the generator will not be able to start.   Fuel issues: Fuel problems such as clogged fuel lines, dirty fuel filters, or old fuel can prevent a generator from starting. The fuel system should be checked regularly to ensure that the fuel is clean and flowing properly.   Electrical issues: Electrical issues such as a faulty starter, loose or corroded connections, or a faulty voltage regulator can also prevent a generator from starting.   Low oil pressure: If the oil pressure is too low, the generator may not start to prevent damage to the engine. Checking the oil pressure and adding oil as needed can help resolve this issue.   Faulty spark plug: A faulty or worn out spark plug can prevent the generat...

  Industrial generators are powerful machines that are designed to provide reliable and consistent power for a wide range of applications. To ensure that your generator runs smoothly and efficiently, it is important to perform regular maintenance. But how often should you have your industrial generator maintained? In this article, we'll explore the recommended maintenance schedule for industrial generators.   Check the oil level: Checking the oil level should be done on a daily basis. Running an engine with low oil can cause severe damage to the engine, so make sure to check the oil level daily and add oil as needed. It is important to use the correct type of oil that is recommended by the manufacturer.   Change the oil: Changing the oil in your industrial generator is typically recommended every 100-200 hours of operation or every 6 months, whichever comes first. The frequency of oil changes can vary depending on the type of generator, its usage and environmental factor...

Are Chinese Diesel Generator Good?   The quality of Chinese-made generators can vary depending on the brand, model, and manufacturer. While there are certainly some high-quality generators produced in China, there are also lower-quality models on the market.   It's important to research the specific brand and model you are considering before making a purchase. Look for reviews from reputable sources, and pay attention to the materials used, the construction quality, and the features offered.   The following are several factors that the editor considers important for evaluation:   1. Engine Brand: With decades of development, Chinese engine brands have reached a very high level. The market is filled with a variety of brands. If you're looking for well-known brands, there are Cummins, Perkins, Deutz, and Isuzu, all of which have factories in China, ensuring top quality. If you want a budget-friendly generator, why not try Chinese local brands like Weichai, SDEC, FAW, ...

Fuzhou Hosem Power Co., Ltd   Fuzhou Hosem Power is located in Fujian, With a modern factory building of 10,000 square meters, each product has passed strict testing engaged in production of the industrial generator,  marine diesel generator sets, portable generators, and GPU  

Are Yangdong Engines Good?           Yangdong engines are manufactured by Yangdong Co., Ltd., a Chinese company that specializes in producing diesel engines used for Trucks, buses, forklifts, power generators and water pump etc.,  they are considered to be good quality and have a good reputation in the industry.   Yangdong Enterprise Profile   Yangdong Co., Ltd., located in Jiangsu, is a joint-stock company specializing in the development and production of diesel engines and automotive components. Recognized as a National High-Tech Enterprise, the company occupies an area of over 400,000 square meters, with total assets of 686 million yuan and a workforce of more than 2,400 employees. Among them, over 780 are technical professionals, including 50 with senior technical titles.   In 1984, Yangdong Co., Ltd. successfully developed the first 480-type diesel engine for vehicles in China. For more than 20 years, Yangdong has been dedicated to the ...